Silverstar AIS-140 Compliant GPS tracker
SST-75 is an AIS-140 Compliant latest product added to SilverStar product portfolio. The device is built to comply with ARAI AIS-140 standards. SST-75 is tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to server. This device is perfectly suitable for applications, which need location acquirement of remote objects.
- Features
- Technical Specification
- Advantages
- AIS-140 Compliant
- 3 Axis Accelerometer
- Gyroscope
- Dual IP addresses for PVT and SOS
- Firmware upgrade over the air
- IP65 rated
GSM Module |
GSM/GPRS: 24[UL]/48[DL] Kbps, 850/900/1800/1900 MHz |
Power Output |
2W, 1W |
SIM Interface |
Module Embedded SIM (simWISE) or e-SIM or replaceable SIM with remote PIN code management |
Antenna |
Internal, Multi band GSM antenna |
Packet Data |
TCP/IP, UDP/IP |
SMS |
PDU, text SMS for data forwarding |
GPS |
Telit SE868v3 module, based on CSR SiRFstarV™ |
GPS Features |
GPS, GLONASS, A- GPS, SBAS (including GAGAN ) compliant |
Sensitivity |
-166 dBm(Tracking),-162 dBm(Acquisition) |
Acquisition |
Cold <35Sec, Warm<35Sec, Hot<1Sec |
Internal Antenna |
On board, internal 25x25mm patch antenna |
Inputs |
1 internally pulled down digital input dedicated for ignition switch 3 internally pulled up Discrete Dry digital inputs with configurable threshold for logical high and low states – adopted for 3 state Panic button.
2 configurable inputs capable to serve as:
Frequency counters - configurable resolution; Up to 5kHz input signal; Signal level (3V < V in ≤ 30V) Accuracy ±2%
Analog inputs with variable resolution - 8bit, adapted to 0-2.5V signal, resolution 20mV, accuracy ±20mV; 8bits, adapted to 0-30V signal, resolution 100mV, accuracy ±100mV
Discrete Dry – configurable threshold for logical high and low states.
Discrete Wet - configurable threshold for logical high and low states. |
Outputs |
2 general purpose open drain outputs (250mA max) with assignable functionality. |
Interfaces |
COM port (RS232) :
Selectable baud rate (9600 or 115000bps)
True RS232 levels; 8 bit, 1 Stop Bit, No Parity
MDT Interface
Serial Protocol
Transparent data mode
Configuration update
Firmware upgrade
Debug port (RS232 out):
External Monitoring of Modem-CPU dialog 115000bps
True RS232 levels; 8 bit, 1 Stop Bit, No Parity
Wire™ (Dallas port):
DS1990A, DS1971 compliant
Extended bus current source with 7 mA driving capability
Driver management (supports up to 100 Driver IDs)
Car Alarm Authorization |
Accelerometer |
3D, ±2g/8g range, 12 Bit representation, 1mg resolution, I2C interface |
Gyroscope |
Three-axis angular rate sensor with a full scale of ±245/±2000 dps and 16 Bit representation, I2C interface |
Connectors |
20pin Molex, Automotive |
Input Voltage |
8-32VDC |
Average Current consumption |
Normal: 40mA
Economic: 23mA
Hibernation: <2mA
Shipment(Off):<20uA (Internal Battery) |
Internal Battery |
Li-Ion Polymer, 3.7V, 1000mAh, rechargeable Up to 200 Tx @ 1Msg/min @ 25°C
Embedded NTC for temperature controlled charging Operating Temperature: -20 (65% charge) to 60°C
Protections: over current, overcharge and over discharge |
Temp, operation |
Temp, operation-30°C to +70°C full performance |
Temp, storage |
-40°C to +85°C |
Humidity |
95% non-condensing |
Ingress Protection |
IP65 |
Vibration, Impact |
ISO 16750 |
Power transients |
ISO 7637 Test level 5 (e-mark directives compliant) with Surge Protector ISO 7637 Test level 4 (e-mark directives compliant) without Surge Protector |
Mounting |
Tie-wraps and/or two sided adhesive |
Certifications |
AIS-140 Component Level Type Approval
Testing ITS as per AIS140: 2016, amendment 1 (11th Dec 2017) notified vide G.S.R 1095(E) dated 28 Nov 2016 and notified vide S.O 1663(E) dated 18 April 2018.
The device must be equipped by Surge Protector |
Weight |
110gr |
Dimensions |
91x73x23mm |
- AIS-140 Compliant
- Dual IP addresses for PVT and SOS.
- Vehicle Real-Time Tracking
- Fleet Management
- Smart Data Acquisition
- Firmware update Over The Air
- Vehicle Security
- IP 65 compliant