Most Reliable Advance Tracker
SilverStar new SST-70 is a compact size entry level device for Fleet Management and Stolen Vehicle Recovery applications. The device is designed to target large fleets, insurance and leasing companies. SST- 70 units are characterized by Silverstar’s high level of quality and are offered at a competitive price for large scale deployments. The SST-70 is equipped with a built in rechargeable battery and GSM jamming detection algorithms for improved compliance with vehicle security applications. The devices are fully certified for automotive standards in accordance with EU and US directives.
- Features
- Specification
- Advantages
- Small size for quick and easy installation
- Built-in Motion Sensor for movement & towing detection
- Built-in Quad band modem and GPS with internal antennas
- Event Memory: ~5K full time stamped events
- GPRS / SMS communication types
- GPIOs
- Roaming management
- Geo-Fence management
- Online event-driven reporting
- OTA configurable
- OTA upgradable
- Certifications: CE (R&TTE, EMC, Safety), FCC EMC, IC EMC, E-Mark, PTCRB
- Supports 6 wires harness
- Supports 2 wire fuse harness for easy installation
| Communication |
GSM Modes |
GPRS CLASS 10, PDU SMS |
| Bands |
Quad-band 850/900/1800/1900MHz |
| Power Output |
2W, 1W |
| SIM |
Internal, replaceable |
| Antenna |
Internal, quad band GSM antenna |
| Packet Data |
TCP/IP, UDP/IP |
| SMS |
PDU |
| GPS |
Technology |
Chipset: SiRFIII GSC3F/LP single chipset |
| Sensitivity(Tracking) |
-159dBm |
| Acquisition(normal) |
Cold < 42Sec, Warm < 35Sec, Hot <1Sec |
| Antenna |
On board, internal patch antenna |
| Inputs & Outputs |
Inputs |
1 internally pulled down input dedicated for ignition switch 1 internally pulled up GPI with assignable functionality and configurable polarity |
| GSM Protocols |
Outputs |
2 general purpose open drain outputs (250mA max) with assignable functionality Motion sensor For movement and towing detection |
| Interfaces |
COM port |
Selectable baud rate (9600 or 115000bps) TTL levels (external TTL-USB adaptor) 8 bit; 1 Stop Bit; No Parity Configuration Firmware upgrade |
| Connectors |
10pin Molex, Automotive |
| Power |
Input Voltage |
9-32VDC |
| Average Current |
Normal: 40mA |
| Consumption |
Economic |
| Internal Battery |
Li-Ion Polymer, 3.7V, 440mAh, rechargeable , Embedded NTC for temperature controlled charging, Operating Temperature: -18 (65% charge) ÷ 60°C |
| Internal Battery |
Battery Monitoring: Temperature (NTC) & voltage, Autonomy: Up to 40 Tx @ 1Msg/min @ 25°C, Protections: over current, overcharge and over discharge |
| Vehicle environment immunity |
Immunity |
Compliant with ISO 11452 and 7637 (in accordance with UN ECE-R10 E-Mark directive) |
| Environment |
Temp |
-30°C to +70°C full performance |
| Operating |
-40°C to +85°C – degraded communication |
| Temp, storage |
-40°C to +85°C |
| Humidity |
95% non-condensing |
| Protection |
IP40 |
| Vibration, Impact |
ISO 16750 |
| Mounting |
Tie-wraps and/or two sided adhesive |
| Dimensions & Weight |
Dimensions |
91 X 71 X 23 mm |
| Weight |
~100gr (appx.) |
- Vehicle Real-Time Tracking
- Vehicle Data Warehouse
- Vehicle Security
- Mobile Asset Tracking
- Fleet Management
- Location Based Service